AIR FLOW DRIER

Posted by Midnyt Blaze on 01:22 with No comments

AIR FLOW DRIER

air flow drier
■ The air flow drier is also called as momentary drier. From 1960s it is applied at pharmaceutical industry. At the beginning of thundation,we began to choose the newest technology both at home and abroad and provide complete equipment with high quality and cheap price to pharmaceutical industry, chemical industry, foodstuff industry and so on. For many years, it has developed 4 series through unceasing improvement and raising:Q series: basic type QG series: fan and distributor type FG series: tail air circle type JG series: reinforce type.
■ The drying strength is large and investment of equipment is saving: the treating amount of pneumatic drier is the largest. The evaporated moisture capacity of equipment manufactured by we will 50-150kg/hr.
The volume of equipment is small and the investment is saving. The advantage can not be compared from other drying equipment.The automatic content is high and the quality of product is good: the raw material to be dried is inside the pipe. The dry time is short(only 0.5-2 seconds).
So that the automatic can be realized. The raw material can not contact with outer substances. So the pollution is small and the quality of product is good.
■ The equipment will be supplied completely and the heat source can be chosen freely: the pneumatic drier will be supplied completely. The basic type consists of filter, heater, feeder, drying pipe, fan and cyclone separator. Customer can install duster and other auxiliary equipment in accordance with practical conditions. On the choice of heating way, pneumatic drier has wide suitability. Customer can choose steam, electricity and air-heated furnace to heat in accordance practical conditions. Meanwhile it should be chosen in accordance with the temperature of raw material to be resisted(or temperature of hot air):if 150℃, choose steam to heat; if <200℃, electric or steam and electric as supplement or heat conduct oil); if ~300℃,coal air-heated furnace; if <600℃, oil air-heated furnace.
■ The damp raw material through conveyer and heated fresh air enter into the drier at the same time. They are mixed fully. Because the area of heat exchange is large, the purpose of evaporation and dry can be realized in a short time. The dried finished product is discharged from cyclone separator. Small parts of powder dust can be recovered and used through cyclone separator or bag duster. Model Q pneumatic drier is operated at negative pressure. The raw material does not pass through fan. Model QG pneumatic drier is operated at positive pressure. The raw material passes though fan with the effect of crushing. Model FG pneumatic drier is tail air circle type. Model JG pneumatic drier is a reinforced type. It integrates flash dry and pneumatic dry in the one body and is also a newest style drier designed and manufactured by we as customer request.
■ Air steam drier is quick, continuous and momentary drying equipment having larger in batch and high in heat efficiency. Even though it can suitable for different raw materials drying, but there exists large difference among raw materials, n order to make customers choose their expected drying equipment, we will provide technical consultation and provide installation and arrangement plan and make test of raw materials free of charge.
AIR FLOW DRIER
Categories: